Energy efficiency.Energy performance.Verified.

Regens AI takes a guaranteed kW off your maximum demand. Written into your SLA, verified at the meter.

Book an MD assessment

For commercial and industrial sites billed on maximum demand.

Every day has its peak.

1 September: 1,873 kW at 14:30. TNB bills only the month's highest.

One half-hour sets the month.

Only 14:00–22:00 on working days counts. One interval set this bill.

1 of 336 peak-period intervals

Forecast the MD. Take 600 kW off it.

RSDM sets the target: 2,318 kW less the guaranteed 600 kW.

98.9% MD forecast accuracy, September

Only what each peak needs.

BESS, coordinating with RSSO, dispatches only the gap: 15 kW at 18:30, 600 kW at 14:30.

600 kW guarantee hit · Thu 17 Sep

600 kW off. Verified at the meter.

Checked on the same 30-minute data TNB bills: 1,718 kW billed.

600 kW verified shave

Book an MD assessment

Now the same month, as TNB bills it.

1,440 half-hours. Without Regens, one of them priced the whole month.

Watts to wisdom, every 30 minutes.

The same four steps run on every interval, on every site. Each one is a Regens module you can see, audit and export.

  1. 01

    Measure

    RSEM · Metering

    Smart meters on incomers and major loads stream interval data into one live model of the site.

  2. 02

    Predict

    RSDM · Demand

    Demand forecasts show what each peak interval would draw without Regens, and set the target: forecast MD less the guaranteed kW.

  3. 03

    Dispatch

    RSSO · Source

    The RSSO discharges battery storage and trims chiller staging and lighting. Only the gap between the load and the target.

  4. 04

    Verify

    RSLM · Consumption

    Every shaved kW and saved kWh is reported against an IPMVP-ready baseline, from the same meter data you see.

How your demand charge is set.

TNB bills capacity and network charges on your maximum demand: the highest 30-minute average recorded in the 14:00–22:00 peak period on working days. Weekends and public holidays are off-peak. A chiller restart, a production ramp, a hot afternoon. One interval, and the whole month is priced on it.

Same site, unmanaged · September 2026 calendar Demand (kW)Peak period, working daysAbove target, peakTarget: MD − 600 kW
336peak half-hours this month: 14:00–22:00 on 21 working days
1of them sets your demand charge

Before and after Regens.

Unmanaged · before RegensManaged · after RegensShaved by Regens
Unmanaged MD2,318kW
Managed MD1,718kW
MD shaved600kW

What the guaranteed shave is worth

kW
kW
RM/kW
Demand charge avoided RM 58,236 / month RM 698,832 / year Billed MD 1,718 kW · 25.9% lower

Example rate: RP4 medium-voltage time-of-use, capacity and network charges combined. Use the rate on your own TNB bill. Arithmetic on your figures, not a quote.

See every system. Optimize every load.

Five modules on one platform. Start with demand, then add consumption, source, metering and billing as your sites need them.

Regens Smart Demand Management

Real-time demand, maximum demand shaving, load curves and peak targets per site. RSDM sets the target for the guaranteed kW shave, and every other module works to it.

Thu 17 Sep · worst day of the month UnmanagedWith RegensShavedTarget

Regens Smart Load Management

Consumption and verified savings: IPMVP-ready baselines, measures and savings tracking.

Chiller OptimizationkW/RT
Lighting OptimizationkWh

Regens Smart Energy Management

Energy management built on smart meter data: meter coverage, interval data, power factor and site roll-ups.

Regens Smart Source Optimization

Hybrid source dispatch. The RSSO decides when battery storage discharges and keeps state of charge in range.

Regens Smart Billing Management

Automated, auditable tenant electricity billing for malls and commercial buildings, from sub-metered consumption.

Explore the platform

Commercial terms built around a number.

Every Regens contract starts from a figure you can check on your own meter data: a guaranteed kW shave, a baseline, a verified saving.

Regens Guarantee

A guaranteed MD shave, in kW.

The kW taken off your maximum demand is written into the SLA. The shave follows your load, and the measurement basis and the remedy are agreed before the project starts.

Example SLA lineMaximum demand reduced by 600 kW each billing month. Guaranteed under SLA.

Regens Zero Capex

No capital outlay on your side.

Storage, controls and metering are funded by Regens investment partners. Terms are agreed per site, and performance is reported from the same platform you use.

Upfront capitalRM 0 from the site owner.

Regens Outperforms

Beat the figure, share the upside.

When the verified shave beats the guaranteed kW, the additional savings are shared. Verification runs on the meter data both sides can see.

SharedVerified savings beyond the guaranteed shave.
How the terms work

Funding energy assets, or building them?

Partner with Regens

Asset investors

Zero Capex projects put storage, chiller and solar assets behind contracted performance. Regens runs the platform and project management, and reports verified results from the meter.

PV and BESS EPCCs

Add a performance layer to the systems you build. Regens dispatches the storage you install and verifies what it delivers, interval by interval.

Find the half-hour that sets your month.

Send 12 months of TNB bills, your TNB load profile and your SLD. You get back your demand profile, the kW shave we would guarantee and the dispatch plan behind it.

Book an MD assessment
Contact us